portableapi.blogg.se - september 2022

#BROCADE SAN SWITCH LICENSE KEYGEN SERIAL#
#BROCADE SAN SWITCH LICENSE KEYGEN DRIVER#

NOT compare-value monitor brocadeConsoleCheckResponse = # OR Login prompt : (?|#)" -setValue monitor brocadeConsoleCheckResponse $1Ĭompare-value monitor brocadeConsoleCheckResponse = # ORĬompare-value monitor brocadeConsoleCheckResponse = # To configure the Local Manager for connection to a Brocade, navigate to the port that the Brocade is connected to, run the command config init, and follow the prompts as below (substituting your Brocade's IP address for 203.0.113.16): (port1/5)]# config init If a super user account can not be provided, use the brocadeEnable rule (below) to give the Local Manager super user access so that automation can be performed. Without admin privileges, the Local Manager will not be able to run the commands needed to backup configurations and perform other automation.

#BROCADE SAN SWITCH LICENSE KEYGEN DRIVER#

If possible, provide the enhanced driver with a username and password that will be enabled to run super user commands. The Local Manager will use the enhanced driver to log into the Brocade and run commands.

the below rulesets are loaded on the LM and scheduled.

automatic backup of the configuration is scheduled.

#BROCADE SAN SWITCH LICENSE KEYGEN SERIAL#

the Local Manager serial port connected to the Brocade is configured as enhanced via the config init command.

Recommended Configurationįor proactive monitoring of the Brocade's status and to ensure the availability of backup configurations it is recommended that:

Supports Brocade software version 07.0.01cT7e1 or higherĬonnect a free serial port on the Local Manager to the Brocade's RS-232 console management port with a standard Cat-5 cable.

The purpose of this document is to detail the installation and configuration of an Uplogix Local Manager (LM) to manage and facilitate remote connectivity to a Brocade.